Connecting Wires to Your Boreem Jia Electric Scooter Key Switch: A Step-by-Step Guide

When it comes to electric scooters, the Boreem Jia is a popular choice for riders seeking both convenience and style. One vital component of this scooter is the key switch, which serves as the ignition for your ride. If you ever find yourself needing to connect wires to the key switch of your Boreem Jia electric scooter, this step-by-step guide will walk you through the process and have you up and running in no time.

Step 1: Gather the Necessary Tools

For this task, you will need:

• A wrench or pliers


• A Phillips screwdriver


• Wire connectors


• Electrical tape

Step 2: Prepare the Electric Scooter

Before working on your scooter, make sure it is turned off and the key is removed from the key switch. Place the scooter on a stable, flat surface, and ensure you have sufficient lighting to perform the task accurately.

Step 3: Locate and Expose the Key Switch

The key switch is typically located on the handlebar of your Boreem Jia electric scooter. Carefully remove any plastic coverings or panels surrounding the key switch using your screwdriver.

Step 4: Identify the Wires

There should be three wires connected to the key switch. Pay close attention to the colors of each wire, as this will be crucial for proper installation. The colors may vary depending on your specific model, but common combinations include red, black, and blue or brown, black, and green.

Step 5: Connecting the Wires

Using your wire connectors and electrical tape, securely attach each wire to its corresponding connection on the key switch. The connections are usually labeled with letters or numbers that match the colors of the wires. Connect the wires in the following order:

• Red wire to B or 1 connection


• Black wire to M or 2 connection


• Blue or green wire to C or 3 connection

Double-check to ensure all connections are tight, and no wires are exposed or loose.

Step 6: Reassemble Your Scooter

Once all wires have been properly connected, reassemble any plastic coverings or panels that you removed to access the key switch. Ensure all screws are tightened securely.

Step 7: Test Your Key Switch

With everything reassembled, insert the key into the key switch and turn it to the On position. If your scooter powers on and appears to be functioning properly, you have successfully connected the wires to your Boreem Jia electric scooter key switch!

And that's it! By following these simple steps, you can easily connect wires to your scooter's key switch and keep enjoying your Boreem Jia electric scooter for many rides to come.