top of page

Troubleshooting Tracktion 7's White Noise Issue

Apr 4, 2024

Are you facing the frustrating issue of white noise while using Tracktion 7? There can be multiple reasons behind this problem, and we are here to help you sort it out. This article will not only explore possible causes but also recommend solutions to help you overcome this irritating audio challenge.

Potential Causes of White Noise in Tracktion 7:

  1. Audio Processing: One possible cause of the white noise could be the digital summing limitation of the audio engine. If your mix is too loud, it may result in clipping and distortions which can appear as white noise.

Solution: You can start by reducing the overall master volume or lowering the gain of individual tracks to provide additional headroom for your mix.

  1. Plugins: Unlicensed/demo plugins used in your project could be responsible for the white noise.

Solution: Ensure that all the plugins and software instruments you are using are fully licensed and up-to-date. Uninstall any unlicensed or unwanted plugins that may be causing the problem.

  1. Audio Interface Issues: Incompatibility or glitches with your audio interface can also result in white noise.

Solution: Make sure that you are using compatible drivers for your audio interface. Update them if necessary and check if the issue gets resolved. Additionally, try using different audio buffer sizes to see if it makes any difference.

  1. Sample Rate Mismatch: Using incompatible audio samples with a different sample rate than your project settings can cause white noise.

Solution: Ensure that all the audio files in your project have the same sample rate as the project settings to prevent any potential issues.

  1. VST/AU conflicts: Issues may arise with VST and AU versions of the same plugin being simultaneously installed on your computer.

Solution: Double-check that you only have either VST or AU versions of the plugin installed. Uninstall the conflicting plugins to avoid any issues.

  1. Hardware Issues: Physical problems with your audio gear, such as a faulty cable or a failing audio interface, can cause white noise as well.

Solution: Inspect your hardware and cables to identify any potential issues and address them accordingly.

In conclusion, the white noise issue in Tracktion 7 can often be resolved by identifying and fixing the aforementioned potential causes. Make sure to systematically troubleshoot these possibilities to enjoy a smooth and seamless recording experience with Tracktion 7. Happy music-making!

bottom of page